The Hive 318 GDO Allstar 9 Switch Trinary 318 MHz One Channel Receiver is an external radio receiver for garage door openers and gate operators that use the classic Allstar/Allister trinary code system. Operating at 318 MHz, this single-channel unit is designed to add or replace radio control on operators that require Allstar-compatible signaling, making it a practical replacement part or retrofit for residential and light commercial applications. The receiver uses a 9-position trinary DIP switch format (+, 0, −) so it can match the exact transmitter code used on legacy Allstar/Allister systems.
Setup is straightforward: match the receiver’s 9 trinary DIP switches to the handheld transmitter’s DIP switches, connect the receiver’s relay output to the opener’s wall control/trigger terminals, and supply low-voltage power according to the opener and receiver installation instructions. Because it is a one-channel relay receiver, it controls a single door or gate circuit. This model is compatible only with 318 MHz Allstar/Allister/All-O-Matic trinary DIP-switch transmitters and is not compatible with rolling-code systems or other frequencies. For best performance and range, mount the receiver and its antenna away from large metal surfaces, and after wiring, test the operator’s safety and reversing systems per local codes.