LiftMaster L979S Wireless Keypad Programming Instructions

Use these instructions to program your LiftMaster L979S wireless keypad to a compatible Security+ 3.0 garage door opener with a white LEARN button. Complete programming before permanently mounting the keypad.:contentReference[oaicite:0]{index=0}

Safety and Important Notes

• Mount and use the keypad only where you can clearly see the moving door.
• Keep the keypad out of reach of children; never allow children to play with the controls.
• Operate the garage door only when the doorway is clear of people, vehicles, and objects.
• Stay in view of the door until it is completely closed and movement has stopped.
• Make sure the opener’s light works; it is used to confirm successful programming.:contentReference[oaicite:1]{index=1}

Before You Begin

1. Confirm your garage door opener has a white LEARN button (Security+ 3.0).:contentReference[oaicite:2]{index=2}
2. Clear the area around the garage door of any obstructions.
3. Decide on a permanent 4–8 digit PIN that only you and trusted users will know.
4. Locate a ladder if needed to reach the opener or door control panel.
5. Review all steps below so you can complete time-sensitive actions quickly.

Programming Options

There are three ways to program the L979S keypad to your garage door opener. Choose the method that best fits your setup.

Option 1: Program Using the myQ App (Recommended)

1. Download and open the myQ app on your smart device.
2. Follow the in-app instructions to connect your compatible garage door opener. You will be asked to confirm that the opener has a white LEARN button.:contentReference[oaicite:3]{index=3}
3. On the back of the L979S keypad, locate the QR code.
4. In the myQ app, choose to add a wireless keypad and scan the QR code on the keypad.
5. Follow the on-screen steps to:
   • Create and save your primary PIN.
   • Finish pairing the keypad with the opener.
6. After setup, you can use the app to manage PINs, create temporary guest codes, and view battery status.:contentReference[oaicite:4]{index=4}

Option 2: Program Using the Opener’s LEARN Button

Use this method if you are not using the myQ app.

1. Climb a ladder if necessary and locate the LEARN button on the garage door opener power head.
2. Press and release the LEARN button once. The LEARN LED will turn on, indicating the opener is in learn mode.:contentReference[oaicite:5]{index=5}
3. Within 30 seconds, go to the keypad and:
   1. Enter a 4–8 digit permanent PIN of your choice.
   2. Press and hold the HOME button until the opener lights flash and/or you hear two clicks.
4. Release the HOME button. The flashing light or clicking sound confirms the keypad has been learned by the opener.:contentReference[oaicite:6]{index=6}

Option 3: Program Using the Wall Control Panel

Use this method if you prefer to place the opener into learn mode from the wall control.

Step 1 – Put the Opener in Programming Mode

Follow the instructions that match your style of wall control:

• Standard Control Panel – Lift the push bar, then press the LEARN button twice. The indicator LED on the panel will begin pulsing repeatedly.
• Push Button Door Control – Press and hold the LIGHT button, then press and release the push button. The LED will start flashing.:contentReference[oaicite:7]{index=7}
• Smart Control Panel – Press MENU, select PROGRAM, and follow the on-screen prompts to place the opener into keypad programming mode.:contentReference[oaicite:8]{index=8}

Step 2 – Pair the Keypad

1. Within 30 seconds of completing Step 1, go to the keypad.
2. Enter a 4–8 digit PIN you want to use for everyday access.
3. Press and hold the HOME button until the garage door opener lights flash and/or you hear two clicks.
4. Release the HOME button. The flashing light or clicking sound confirms successful programming.:contentReference[oaicite:9]{index=9}

Test the Keypad

1. Make sure the garage door is fully closed.
2. On the keypad, enter your programmed PIN.
3. Press the HOME button once.
4. Confirm that the door begins to open. The keypad LEDs will flash while the opener is moving.:contentReference[oaicite:10]{index=10}

If the door does not move, wait until the opener’s LEARN LED turns off (this may take up to three minutes), then repeat the programming steps for your chosen method.

Everyday Use

• To operate the door, enter your PIN and press HOME to open or close the door.
• If you enter the wrong PIN, press X to cancel, then re-enter the correct PIN and press HOME.:contentReference[oaicite:11]{index=11}
• Features such as multiple PINs, temporary guest codes, and advanced PIN management are available through the myQ app once the keypad and opener are connected.:contentReference[oaicite:12]{index=12}