How do I program this remote?

 How to Program a Linear Multi-Code Remote 3089

1.  Push down and in with both thumbs on the bottom front of the remote to slide to bottom cover off.  This may not be easy to do.  You can also use a coin or flat head screw driver to pop the bottom cover off using the tab on the bottom of the remote.

2.  Locate the 10 switch code on the receiver or working remote.  Your garage or gate will have an external receiver that will have the 10 switch code in it.  If you have a working remote it is usually easier to use the switches from the remote.

3.  Move the switches in the new remote so they are in the same order as the receiver or working remote.

4.  Press the remote.  The garage or gate should operate.  If the remote does not work then reverse all the switches.