I am looking at the Garage Door Weatherstripping. However, the requirement is not rectangular but has an angle that I have a question on. The exterior trim has an angle from the side to the top of the door. The door is 7ft. However, the sides are 6 ft. from the ground to an angle that runs for 16 inches to the top, one foot from the side. That sixteen inches then connects to a 14 ft run on the top of the door. However, the door is 16 feet. The exterior portion of the weatherstripping is 14 ft at the top although the door itself is 16 ft. Can the weatherstripping material be trimmed with a normal wood working saw? How would the order be placed to accomodate this unique design and provide sufficient coverage? How would that be ordered. I would want 100 nails as well. Can you provide a quote on the price. Also, can you send a picture of the sandstone and one of the almond as the website is very hard to distinguish. If that is not feasible would the sandstone be the same color as the Lowe's sandstone version. see link https://www.lowes.com/pd/PVC-GAR-DOOR-STP-SNDSTN-2-INX9-FT/5013353109
Hi, what you have is called a gothic opening which is very common. We use a hack saw to score the back and it will snap evenly. Since you have angles you can use a hack saw to cut angles all the way through. For color choices we have a sample listing for $5.99 where you can pick up to 4 colors. We recommend this because pictures will never look exactly how the product does in person. For ordering I recommend using our kit listing where you pick the door size and we cut two sides and a top. When you pick the sides select 2 feet longer so you can cut the angle pieces.
