The LiftMaster 883LMW Push Button is a single-button, hardwired wall control designed for Security+ 2.0 garage door openers. It provides simple open/close/stop operation from a fixed location and is ideal as a primary or secondary wall button in residential garages or light-duty commercial spaces. Engineered for use with LiftMaster, Chamberlain, and compatible Craftsman openers that feature a Yellow Learn Button and MyQ technology, the 883LMW does not add MyQ functionality by itself; instead, it reliably controls MyQ‑enabled and Security+ 2.0 systems already built into the opener. This wired door control is a practical replacement part for worn or damaged wall buttons and a clean upgrade from older, non‑Security+ accessories.
Installation is straightforward: connect two low‑voltage conductors to the opener’s wall control terminals (typically the red and white Security+ 2.0 inputs; do not use the safety sensor terminals). No radio programming or battery is required since the unit draws low voltage directly from the operator, providing interference‑free performance. For safety and compliance, mount the control within sight of the door, at least 5 ft from the floor, and keep it out of reach of children. The 883LMW is intended for indoor use and is compatible with most LiftMaster/Chamberlain residential models produced from 2011 to present that use Security+ 2.0 (Yellow Learn Button), including popular Wi‑Fi/MyQ models; it is not compatible with earlier Security+ openers that use different learn button colors. This makes the 883LMW a dependable wired push button for replacement, expansion, or new installs on modern Security+ 2.0 systems.