The Digi-Code DC5135 Open/Close/Stop Receiver is a three-function radio receiver designed to interface wireless remotes with gate and commercial door operators that accept dry-contact inputs. Engineered for Open, Close, and Stop control, it provides individual relay outputs that wire directly to the operator’s corresponding terminals, letting you add remote control to systems that require discrete commands rather than a single toggle. It is commonly used in residential communities, light commercial entrances, and industrial access points where reliable remote actuation of swing gates, slide gates, barrier arms, or sectional/rolling doors is required.
Intended for use with compatible Digi-Code transmitters, the DC5135 is installed by supplying appropriate low-voltage power per the operator and receiver documentation, connecting the three output relays to the Open/Close/Stop inputs, and programming the remotes according to the code format supported by the system. For best performance and safety, mount the receiver in a location with good RF visibility and within the operator enclosure when possible, and verify that all UL 325-compliant entrapment protection devices are installed and functioning before enabling remote operation. This receiver is a practical replacement or upgrade option when you need a dedicated three-channel, Open/Close/Stop wireless interface for gate and door operators using standard dry-contact control logic.