The Hormann HS1 Hand Remote 315MHz is a compact, single-button handheld transmitter designed to operate compatible Hörmann garage door and gate operators that use the North American 315 MHz radio standard. Ideal as a replacement remote or an extra transmitter for households or facilities, the HS1 provides straightforward one-channel control to open, close, or stop a door or gate when paired with a matching Hörmann 315 MHz receiver.
This HS1 315 MHz model is intended specifically for Hörmann systems using the 315 MHz frequency and is not compatible with Hörmann 868 MHz BiSecur or 433 MHz remotes, nor with other brands unless a Hörmann 315 MHz external receiver is installed. Typical setup involves placing the operator’s 315 MHz receiver into learn mode and then pressing the HS1 button to complete pairing; always follow your operator or receiver manual for exact programming steps and safety instructions. Suitable for residential or light commercial applications, the HS1 should be used only when the doorway is in clear view and kept out of reach of children, in accordance with garage door operator safety guidelines.
Programming a HS1 remote (channel 1)
1. Briefly press and release the “P” button (programming button) on the opener once – the LED starts to flash slowly.
2. Press the button you wish to use on the hand transmitter for at least 1 second.
Note: The distance between the transmitter and the radio receiver should be at least 3 ft.
3. Once the programming has been completed, the LED on the opener starts flashing rapidly.
4. Release the button on the hand transmitter. Once the flashing stops, the integrated radio receiver is ready for operation. Test the function.
Note: If programming is not carried out within 20 seconds of pressing the “P” button, the LED on the opener will stop flashing.
Programming a HS1 remote to control the opener's light (channel 2)
1. Press and release the “P” button (programming button) on the opener twice – the LED starts to flash (double flash).
2. Press the button you wish to use on the hand transmitter for at least 1 second.
Note: The distance between the transmitter and the radio receiver should be at least 3 ft.
3. Once the programming has been completed, the LED on the opener starts flashing rapidly.
4. Release the button on the hand transmitter. Once the flashing stops, the integrated radio receiver is ready for operation. Test the function.
Note: If programming is not carried out within 20 seconds of pressing the “P” button, the LED on the opener will stop flashing.
Deleting radio codes
You cannot delete individual radio codes. If you have to delete a radio code you will have to delete all codes.
Press and hold the “P” button. The LED starts flashing slowly. Continue to hold the button until the LED flashes rapidly and then stops flashing and an audible signal sounds. All radio codes are now deleted.
Note: If you release the “P” button before the audible signal sounds, the deleting procedure will be interrupted.