The Allstar 111965 Single Channel MVP Gate Receiver is an external radio receiver designed to add or restore remote control to a gate or door operator that accepts a dry-contact input. Built for the Allstar MVP control platform, this receiver provides a single relay output to trigger an operator’s open/close command and uses a simple 4-wire hookup—two leads for 12 VDC power and two leads for the control connection. It’s a practical replacement part or upgrade for residential or light commercial applications where an operator needs reliable radio control using compatible Allstar MVP transmitters.
Operating on Allstar’s MVP 318 MHz technology, the 111965 pairs with compatible Allstar/Allister/Pulsar MVP-series remote controls to deliver dependable, interference-resistant performance. Installation is straightforward: mount the receiver in a suitable location, connect the 12 VDC supply and control wires to the operator’s radio/activation terminals, and use the onboard learn/program button to enroll transmitters. For best range, position the antenna upright and away from large metal surfaces. Always follow the operator manufacturer’s instructions and verify proper entrapment protection after installation to meet safety requirements. This single-channel MVP receiver is ideal for adding universal radio control to most operators that accept a momentary dry contact, while maintaining compatibility with popular Allstar MVP 318 MHz remotes.