LiftMaster 041D7742-7 Travel Module

Rating:
100% of 100
In stock
SKU
041D7742-7

Quick Overview

  • OEM LiftMaster 041D7742-7 Travel Module: replaces the internal travel control board to restore precise up/down limit operation
  • Compatibility: for select LiftMaster/Chamberlain Security+ 2.0 ceiling-mount chain and belt-drive openers that use the 041D7742-series travel module (yellow Learn button; verify your existing part number label matches 041D7742-7)
  • What’s included: 1 replacement travel module (board only; reuse existing mounting hardware and wiring)
  • Installation: plug-in, no-solder swap; disconnect power, remove old module, install 041D7742-7, then reprogram open/close travel limits
  • Form factor: compact OEM board designed to mount inside the operator head on factory posts; maintains original rail and door travel range
  • Performance: integrated electronic travel sensing for consistent stop points and smooth starts/stops after limit reprogramming
  • Use conditions: indoor garage-door operator head units; pair only with compatible Security+ 2.0 logic boards per opener documentation
$39.66

Secured and trusted checkout with

The LiftMaster 041D7742-7 Travel Module is an OEM replacement board designed to control and sense the open and close travel limits on compatible LiftMaster residential garage door openers. When installed and programmed, this electronic module communicates with the operator’s logic board to accurately establish the door’s up and down stop points, contributing to smooth operation, consistent stopping, and proper safety reversal behavior. It is commonly used on select Security+ 2.0 belt- and chain-drive models that use electronic limit setting rather than mechanical limit switches. Typical symptoms of a failing travel module include doors that won’t complete a cycle, inconsistent limits, or related diagnostic indications on the opener.

Installation generally requires disconnecting power, accessing the operator head, and connecting the module to the control board per the service manual for your specific model. After replacement, the opener’s travel and force must be reprogrammed using the unit’s setup procedure or wall control, and photo eyes should be tested to confirm UL-compliant safety operation. Compatibility varies by model; always verify by matching 041D7742-7 with the part number printed on your existing component or by checking the official parts list for your opener (often found for select 8355, 8360, 8550 series and other Security+ 2.0 units). Using the correct LiftMaster travel module helps restore reliable door travel control and is an ideal solution for homeowners looking for a precise, factory-grade replacement part.

5
Rating:
100% of 100
Write Your Own Review
You're reviewing:LiftMaster 041D7742-7 Travel Module
Your Rating
Customer Questions
How do I install a 41D7742-7 or 41D7742-5 Travel module
Tools Required 1/4" nut driver or socket Phillips head screwdriver Flat head screwdriver Preparation Note: Close the garage door before installing the travel module. Disconnect all electric and battery power...
What is the LiftMaster 41D7742-7 travel module and what does it do?
The LiftMaster 41D7742-7 travel module is an AC motor control component that controls the garage door opener’s up and down travel limits. It monitors the door position and tells the opener when to stop so the door opens and closes fully and safely.
Which garage door openers are compatible with the 41D7742-7 travel module?
The 41D7742-7 travel module fits select 1/2 HP AC LiftMaster, Chamberlain, Craftsman, and Raynor chain and belt drive openers. Always confirm compatibility with your opener model number in the manual or parts list before ordering.
Do I need to reprogram the opener after replacing the travel module?
Yes. After replacing the travel module you must reprogram the opener’s up and down travel limits using the Adjustment, UP, and DOWN buttons. Once set, test the door and the safety reversal system before normal use.
Did you find what you were looking for?
BrandCompatible Models
LiftMaster8065, 8075, 8155, 8155W, 8164W, 8165, 8165W, 8355, 8355W, 8365, 8365W-267, ATS-W
ChamberlainB500, B503, B503C, B510, B550, B550C, B2202, B2401MC, B2405, C203, C203C, C205, C205C, C2102, C2405, C253, C253C, C400, C400C, C410, C410C, C450, C450C, D2101, HD420EV
RaynorAirman II (8155RGD / 81550RGD), Aviator II (8355RGD / 8355WRGD), Corporal II (8165RGD / 8165WRGD / 81650RGD), Pilot II (8365RGD / 8365-267RGD / 83650RGD)
Craftsman54915, 54918, 54930, 54985, 54990