Miller Edge RB-G-K10C RBand System – Detailed Description
The Miller Edge RB‑G‑K10C RBand system is a dual‑channel wireless transmitter and receiver kit engineered to provide reliable safety edge monitoring for automated gates. Eliminating the need for hard‑wired connections, the RBand receiver can pair with up to six transmitters and is designed to endure harsh outdoor environments. Its upgraded firmware and auto‑adjusting transmitter power ensure strong signal reliability in areas with heavy RF interference, making it ideal for residential or commercial gate installations.
This monitored wireless kit meets UL 325 requirements for systems manufactured after January 2016 and features easy configuration with on‑board diagnostics for streamlined installation and troubleshooting. A bi‑directional link boosts immunity to radio frequency interference, while the ruggedized transmitter casing and NEMA 4‑rated enclosure protect against weather. Backed by a two‑year warranty, the RB‑G‑K10C uses standard AA lithium batteries with an estimated 2‑year life and includes both the RB‑G‑RX10 receiver and RB‑TX10 transmitter.
- Easy to configure: Simplifies installation.
- Monitored system: Designed for gate operators manufactured after January 2016.
- Two‑channel receiver: Supports up to six transmitters.
- On‑board diagnostics: Simplifies setup and troubleshooting.
- Bi‑directional link: Enhances immunity to RF interference.
- Rugged transmitter: Built for outdoor conditions.
- UL 325 compliance and warranty: Recognized component with a two‑year warranty.
- Response time: 135 ms.
- Operating temperature: –40 °F to +140 °F (–40 °C to +60 °C).
- Frequency: 916 MHz.
- Operating range: 50 ft nominal; up to 100 ft under optimal conditions.
- Receiver electrical: 12–24 V AC/DC, 100 mA; output 10 K Ω normally closed.
- Receiver dimensions: 3 5/8 ″ W × 4 1/8 ″ H × 1 5/8 ″ D (93 × 105 × 42 mm); steel enclosure; external whip antenna.
- Transmitter electrical: (2) AA 3.6 V lithium batteries (approx. 2‑year life); input 10 K Ω monitored sensing edge.
- Transmitter dimensions: 1 13/16 ″ W × 5 3/4 ″ H × 1 3/4 ″ D (46 × 146 × 44 mm); polycarbonate enclosure; NEMA 4 protection.
