The Clima-GUARD safety device combines an ME112 electric sensing edge and a loop seal all in one. The purpose is to provide a weather seal for doors having uneven floors, and to reduce the risk of damaging the sensing edge from over-compression. Clima-GUARD was designed for use on 2” sectional doors and is custom manufactured to required length and outlet location.
Clima-GUARD provides the protection of an ANSI/UL325 Recognized ME112 sensing edge. When touch activated, the internal sensor sends a signal to the motor to stop and/or reverse motion. The sensing edge is wrapped in a loop seal, which helps prolong the life of the sensing edge and fill any unwanted gaps created by uneven flooring.
UL325-2010 Commercial Operator Compatibility
Mounting Channel Options
Color | Black or yellow |
Length | Order in 1 inch incremenets |
Maximum Length | Electric : 100 ft., Air-Wave : 60 ft. |
Sensitivity | Nominal 6-10 lbf |
Lead Wire | SJTO, 22 gauge, 2 ft. length |
Wire Outlet Location | Left, right, end or top |
Electrical Maximum | 24 volts AC/DC, 1/2 amp |
Electrical Configuration | Normally open |
Operating Temperature | Meets or exceeds UL requirement |
Exterior Materials | Flexible PVC |
Contact Element | Alumaglas |
Agency Approvals | UL 325 Recognized Component |