Miller Edge ME112 2 or 4-Wire Monitored
Model #ME112 is designed for use on 1-1/4 to 1-1/2 inch thick doors and are custom manufactured to required length. Our Sensing Edges are designed to provide a safe means of stopping and reversing a door’s motion. Typically powered by just 24 volts, electrically activated Sensing Edges are attached to the leading edge of the door. When touch activated, the internal sensor sends a signal to the motor to stop and/or reverse motion.
The ME112 slide in style edge is designed to install easily on most 1-3/8” to 1-5/8” thick sectional doors. Most sectional doors of this size will accept the t-configuration in their existing bottom extrusion- simply slide out the weather seal and slid in the ME112 Sensing Edge. For your convenience, we also offer a variety of mounting channel options for easy installation.
ME112 has been tested with most UL listed commercial operator manufacturers to comply with the UL325-2010 standard and may be used as the required monitored device or as an ancillary device.
| Color | Black |
| Length | Order in 1 inch incremenets |
| Maximum Length | Electric : 100 ft., Air-Wave : 60 ft., Pneumatic : 18 ft. |
| Sensitivity | Nominal 6-10 lbf |
| Lead Wire | SJTO, 22 gauge, 2 ft. length |
| Wire Outlet Location | Left, right, end or top |
| Electrical Maximum | 24 volts AC/DC, 1/2 amp |
| Electrical Configuration | Normall Open |
| Operating Temperature | Meets or exceeds UL Requirement |
| Exterior Materials | Flexible PVC |
| Contact Element | Alumaglas |
| Agency Approvals | UL 325 Recognized Component |
