The MT sensing edge product line consists of three standard models: MT21 (2”W x 1”H), MT22 (2”W x 2”H), and MT33 (3”W x 3”H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.
Color | Gray, Black, Yellow, Yellow/Black Stripe, XR5(yellow) |
Length | Order in 1 inch increments |
Maximum Length | Electric : 150 ft., Air-Wave : 60 ft., Pneumatic : 18 ft. |
Sensitivity | Nominal 4-8 lbf |
Lead Wire | SJTO, 18 gauge, 2 ft. length |
Wire Outlet Location | Universal, left or right |
Electrical Maximum | 24 volts AC/DC, 1/2 amp |
Electrical Configuration | Normally open |
Operating Temperature | Meets or exceeds UL requirement |
Exterior Materials | Heavy Duty reinforced PVC |
Cotact Element | Alumaglas |
Agency Approvals | UL 325 Recognized Component |
Write Your Own Review
Customer Questions